All research papers will be double-blinded peer-reviewed and published in the conference proceedings, indexed by Scopus and EI, regardless the presentation form (oral or poster).

Some papers with high-quality will be selected for submitting an extended version to Special Issues of high-indexed journals, such as Journal of Building Performance Simulation and Building Simulation.

  • September 3rd 2023 - Manuscripts preview via onsite USB-drive
  • September 17th 2023 - Final upload for camera-ready version
  • Around April 2024 - Pre-print preview on IBPSA publications
  • Around September 2024 - Publication with indexation and DOI

You may retrieve the Certificate of Acceptance by your contribution ID. It only certifies that your manuscript has been accepted and will be published in the Building Simulation Conference Proceedings Vol.18 (ISSN: 2522-2708). We cannot offer the front cover, pre-print PDF, page number, indexation or DOI prior to the softcopy of the conference proceedings.

Only the accepted and presented paper with the full registration payment will be included. If you find your paper missing in the following list, please contact us at secretariat@bs2023.org.

  • 1107  Simulation-based electric lighting control algorithm: Integrating daylight simulation with daylight-linked lighting control
  • 1109  Parametric simulation for urban street design to improve outdoor thermal comfort and building energy efficiency: case studies in tropical and subtropical cities
  • 1113  Thermal fluxes and solar energy storage in a massive brick wall in natural conditions, year-round simulation
  • 1114  Integrated control of radiant floor heating system in residential buildings
  • 1117  Thermal Performance and Characterization of a Sawdust-raw Earth Material for Building Application and Behavior
  • 1118  Scalable performance assessment of a chiller in existing buildings with different thermal dynamics
  • 1119  Study analysis of solution equilibrium concentration as evaluation index of liquid desiccant dehumidification system
  • 1123  Comparative study of simulation methods applied to heat transfer calculation of building walls containing phase change materials
  • 1124  Intelligent simulation:fast deep multi-fidelity surrogate models to assess building green performances at the early design stage
  • 1128  On the choice of the weather dataset in hygrothermal simulations in Mediterranean climate: MRY vs TWY
  • 1129  Moisture storage and water uptake experimental data for three-layer and five-layer CLT specimens
  • 1132  Impact of geometrical resolution on long-term climate-based daylight metrics
  • 1133  Optimization of integrated energy system with phase-change energy storage heat pump considering thermal inertia
  • 1136  Energy-saving analysis of envelope structure of traditional dwellings in Garze prefecture, tibetan area of western Sichuan plateau
  • 1138  Daylighting simulation and experimental validation of granular aerogel glazing system
  • 1140  Investigation on air-conditioning energy usage in educational office buildings based on sensing and clustering
  • 1141  A genetic-algorithm-based framework for assessing the performance of shading strategies
  • 1143  Enhanced evaluation of ground-coupled heat pump operation
  • 1144  Integration of dynamic radiator models in building performance simulation tools. Effects of radiator thermal capacitance on buildings’ heating system efficiency.
  • 1145  Optimal Selection of Features for Heat Pump Models based on artificial neural networks
  • 1147  Design and optimization of a novel dual source heat pump unit in a nearly-zero energy building
  • 1148  Simplified modelling methods to design integrative lighting
  • 1149  Energy performance of thermochromic smart windows in office buildings in different climate zones
  • 1151  Disparities in circadian potential: the impact of building form and interior wall composition on dynamic light exposure
  • 1152  The impact of operated window shading on visual comfort, non-visual health, and energy demand from electric lighting
  • 1153  Impact of pore network parameters on hygric properties of porous materials
  • 1154  Sensitivity Analysis of building archetypes for the life cycle assessments of districts
  • 1155  Towards smart electric heaters for homes in-line with EN-ISO 52120 Standard
  • 1156  Transmission and infection risk of COVID-19 when people cough in an elevator
  • 1157  Comparing dynamic statistical models on simulated monitoring data to co-heating test results for estimating the Heat Loss Coefficient
  • 1158  Life cycle-based comparison of office buildings in timber and concrete construction with special consideration of thermal masses using building simulation
  • 1160  Hygrothermal exposure in a nearly zero-energy school during heat waves
  • 1161  A new fast dynamic Smagorinsky model using artificial neural network for simulation of outdoor airflow and pollutant dispersion
  • 1162  A new DX cooling coil model with subcool and reheat modes in EnergyPlus
  • 1163  Design strategy and energy consumption simulation of a high efficiency chilled-water plant
  • 1164  A non-cooperative game-based distributed optimization for chilled water pumps control
  • 1168  Selection of the most high-performance and robust design for a zero-emission neighbourhood: Case study of Flytårnet area in Norway
  • 1169  Data-driven prediction of residential building energy performance at an urban scale through end-use demand segregation
  • 1170  Effect of Weather and Occupancy Prediction Uncertainties on the Performance of a Model Predictive Controller Applied to a District Heating System
  • 1171  Energy flexibility and resiliency analysis of old and new single family buildings in Nordic climate
  • 1172  Automation of Life Cycle Assessments for large-scale building refurbishments
  • 1173  Framework for automated IFC-based thermal comfort analysis based on IFC model maturity
  • 1174  Daylight, glare, and view: Multi-objective design workflow for open workplace
  • 1175  Using surrogate modelling and stochastic optimization for optimal day-ahead demand response strategies under weather uncertainty
  • 1176  Causality-based model for decision-making of building energy retrofit
  • 1177  Study on renovation strategy of natural ventilation based on manual opening of windows
  • 1178  Indoor Air Quality (IAQ) in the Modelica IBPSA Library (part I): Validation of the considered hypotheses regarding polluted air in residential and tertiary buildings
  • 1179  Indoor Air Quality (IAQ) in the IBPSA Modelica Library (part II): Methodology of integration of new IAQ simulation models
  • 1180  Evaluation of upward and downward reflectance of different building facade reflectors between urban canyons
  • 1181  How does building shape affect carbon neutrality in the early design stage? Sensitivity analysis and optimization design of office buildings in cold regions of China
  • 1183  The design and optimization of a novel heating tower compound ground source heat pump heat storage system
  • 1185  TRNSYS model of district heating system used as heat storage for decentralized solar thermal collectors
  • 1187  A novel approach to address spatial uncertainties and simultaneously optimize concept, scope, and equipment design in district heating system
  • 1188  Performance prediction of different topology organizations in district heating systems with component-based machine learning
  • 1189  A comparison of machine learning functions for time-series prediction in buildings
  • 1190  Daylighting design optimization of symmetrical bilateral openings with internal blinds in tropical classrooms using RBFOpt algorithm
  • 1191  Establishment of DGP change curve database of office building in Shanghai
  • 1193  Correlation analysis between indoor/outdoor environment and occupants’ window adjustment behavior using explainable AI (XAI)
  • 1194  Considering the mutual information criterion for sensor configuration selection in human activity recognition in smart homes
  • 1195  Application of simulation-based framework to evaluate the performance of an optimized nearly zero energy dwelling during heatwave events in Belgium
  • 1196  Method development for lowering supply temperatures in existing buildings using minimal building information and demand measurement data
  • 1197  A cosimulation strategy based on OPENFOAM for solving thermal distribution and airflow in data center
  • 1198  Impact of standard versus tracked-based user behavior into energy simulations of open-space offices
  • 1199  Overheating in existing and renovated Danish terraced houses
  • 1201  Exploring the Potential of Digital Twins at the District Scale: a Framework for Investigation
  • 1206  Optimizing technology of chilled water system simulator for an industrial plant FAB (Fabrication)
  • 1207  Application of deep reinforcement learning algorithm in optimal control of fan coil units air supply volume
  • 1208  Numerical analysis of wind effects on mechanically induced depressurization for asbestos abatement
  • 1209  A multi-sourced data and agent-based approach for complementing Time Use Surveys in the context of residential human activity and load curve simulation
  • 1210  Improving Radiance simulation workflow with process of anti-aliasing and tone-mapping to enhance users’ experience in VR environments
  • 1212  Prediction of daylighting performance using machine learning algorithm based on radiance simulated data
  • 1213  Ecological network analysis of integrated energy systems with Modelica: A novel biomimetic approach for building design and operation
  • 1215  Simulation study on how geometric factors influence the flow coefficient of perforated plate
  • 1217  Collaborative approach to design: case-study of future-proofing a Paragraph 80 house
  • 1218  Comparison between popular Genetic Algorithm (GA)-based tool and Covariance Matrix Adaptation - Evolutionary Strategy (CMA-ES) for optimizing indoor daylight
  • 1219  Developing an advanced daylight model for a shading system with conditional generative adversarial network (cGAN)
  • 1220  Regional carbon emission reduction prediction via retrofits of commercial buildings with a case study of US school buildings in hot climates
  • 1221  A GIS-based Approach to Assess Elderly liveability in Singapore and to Suggest Possible Directions for Optimization
  • 1223  Real-time thermal comfort classification using an occupants activity model from thermal images
  • 1225  Experimental and numerical investigation of the intermittent heating performance improvement of novel flat-heat-pipe terminal
  • 1226  A data-driven framework for building energy benchmarking: Time-series decomposition, clustering and change-point regression
  • 1227  Feasibility analysis of pod and deep autoencoder for reduced order modelling Indoor environment cfd prediction
  • 1229  A performance-based acoustical design strategy for centralized air distribution networks
  • 1231  Assessing daylight illuminance and glare risk of Polymer Dispersed Liquid Crystal (PDLC) glazing with Radiance
  • 1232  Building simulation analysis using a 60-year historical weather series in Brasília/Brazil: How has the changing climate impacted the thermal performance of social housing?
  • 1233  A use case assessment method for mobilized heat battery in residential buildings
  • 1234  Systematic approach to define a prototype building model: Convenience Store
  • 1235  Effectiveness extrapolation of rotary energy exchangers and its impact on energy simulation
  • 1236  Analysis of the effect of emission rate of PM2.5 with different setting forms on indoor air quality in CFD
  • 1237  Passive design multi-objective optimization for high-performance tropical office buildings: Comparison of four different decision-making algorithms
  • 1238  Investigation on the thermal dynamic performance and thermal comfort of a PV-Trombe wall
  • 1239  Investigation on heat-flow and energy consumption by solar shielding at the openings
  • 1240  An easy to set up residual generator based on multilayer perceptron networks and Bayesian optimisation for the application in automated fault detection and diagnosis in building systems
  • 1241  A comparative study of between photographic and simulated HDR images
  • 1242  Numerical investigation of the heat transfer in realistic rooms with a two-panel radiator
  • 1243  Economic analysis of rooftop photovoltaic system under different shading conditions for 20 cities in China
  • 1245  Aerosol concentration and airflow distribution assessment in a multi-zone indoor space with mechanical ventilation: field measurements and CFD simulations
  • 1246  Evaluation of blinds control techniques for daylight and visual comfort in complex real-world conditions
  • 1247  Numerical modeling of a novel Rotary Heat Recovery Wheel with embedded Phase Change Material (RHRW+PCM).
  • 1248  Field testing and numerical simulation of pollutants in residential kitchen ceiling make-up air method
  • 1249  Enabling space cooling in combined heat distribution circuits by grouping same temperature demands
  • 1250  Validation of EnergyPlus infiltration models for a case study in a high-rise residential building
  • 1251  Analysis of energy flexibility of an efficient positive energy apartment building in a Nordic climate by thermal mass activation
  • 1252  Measuring legibility of public open spaces using Deep Convolutional Neural Network: A case study in Harbin
  • 1253  Impact of different Input Data on Urban Building Energy Modeling for the German Building Stock
  • 1254  Measuring the effectiveness of retrofit, behavioural and transformational adaptation solutions to heat waves
  • 1255  A hybrid simulation/real data based learning approach for building thermal comfort modeling
  • 1256  Comparative data analysis of two tools estimating annual heating load curves of buildings on an urban scale based on use cases
  • 1258  Bridging the gap between building energy modeling and controls implementation - experiences of, and best practice for, coupled HVAC-control modeling
  • 1259  Quantifying the cooling demand of urban areas using aerial images
  • 1260  An expert decision support tool for office buildings facades during early design stages: A parametric approach
  • 1261  Multi-level identification performance for RC-based control-oriented model of the UK office archetype
  • 1262  Stochastic model-predictive control of district-scale building energy systems using SpineOpt
  • 1263  Model predictive control strategy of heat pump heating systems for demand response
  • 1264  CFD simulation for opaque ventilated facades in hot arid climate based on literature review design parameters.
  • 1265  A framework for calibrating and validating an air loop dynamic model in an HVAC system in Modelica
  • 1266  Classification of building properties from the German census data for energy analyses purposes
  • 1268  The impact of urban layouts on indoor thermal condition: a comparative study between traditional and contemporary urban blocks in hot arid climate
  • 1272  A critical analysis of future weather data for building and energy modeling
  • 1273  Improved urban irradiation simulations using the Pyrano 2-phase model with semantic obstruction segmentation
  • 1274  Building-to-grid modeling framework with a case study of battery systems
  • 1275  GNNs based method for evaluating HVAC terminal piping layout solutions in office buildings
  • 1276  High thermal performance phase-change material integrated bamboo wall
  • 1278  Development of simplified chiller energy consumption simulation model using load ratio in PKPM BES module
  • 1279  Study on the characteristics of heating and cooling load of underground office buildings in Beijing
  • 1280  Optimal supply air temperature control for dedicated outdoor air system under varying climate zones
  • 1281  Evaluating Community Energy Resilience and the Efficacy of On-site Solar and Storage
  • 1284  Machine learning-based district load forecasting models for fifth-generation district heating and cooling systems
  • 1285  Characterizing the energy flexibility of districts using urban building energy modelling
  • 1287  Evaluation of the oversizing and computational speed of different open-source borefield sizing methods
  • 1288  Investigation of district heating peak load reduction and potential business models
  • 1289  Simulation-based framework for building of the future studies
  • 1290  BIM interoperability: graph neural networks as an alternative for data communication and relationship establishment in human-centric studies
  • 1291  Inverse identification of pollutant sources in 2D street canyons based on real weather conditions
  • 1293  Neutralizing room pressure in multi-room VAV systems through model-based static pressure reset control
  • 1294  Image-based residential building sunlight inspection using step-wise deep learning models
  • 1297  Multi-objective design and performance analysis of renewable energy cogeneration systems considering the effects of climatic conditionsMulti-objective design and performance analysis of renewable energy cogeneration systems considering the effects of climatic conditions
  • 1300  Machine learning techniques and 3D GIS building model for accurate solar radiation prediction on building facades in mountainous and urban regions
  • 1301  Empirical validation of building energy modeling input parameters: Cooling performance curves of a direct expansion coil
  • 1303  Increasing accuracy of distribution prediction via an environmental soft sensor to realize air conditioning that combines personal comfort and indoor environmental distribution
  • 1304  Data-driven reduced order modelling using clusters of thermal dynamics
  • 1305  IEA EBC Annex 81 – Data-driven smart buildings: Building-to-grid applications
  • 1306  Computational Fluid Dynamics (CFD) based spatial mapping of indoor air quality and thermal comfort in the indoor environment
  • 1307  Multi-performance method for urban densification
  • 1308  A parametric approach to evaluate the impact of BIPV facades on outdoor thermal comfort in different urban contexts
  • 1309  What metrics does the building energy performance community use to compare dynamic models?
  • 1310  Dynamic drivers of building Carbon emissions
  • 1311  Machine learning-based Sobol sensitivity analysis for building energy assessment without Monte Carlo integral
  • 1312  A holistic view of solutions in social housing in São Paulo - Brazil: CO2 emissions, performance, and cost of roof compositions
  • 1313  The use of phase change materials in heating buildings: a solar-adaptive passive system
  • 1314  Numerical simulation and optimal design of micro-climate of shelter parts of air conditioning outer unit
  • 1315  What can we learn from Honda Smart Home? A zero-net energy home in California
  • 1316  Simulation study on human thermal comfort by position of Kitchen vent
  • 1318  EUI benchmarks for net-zero energy buildings in India
  • 1319  Residential Façade Optimisation for Daylight-Thermal Balance and Climate Change Impact in a Hot and Humid Climate
  • 1320  A classification method of room radiant and convective time series based on decision trees and support vector machine
  • 1321  Investigation on the valid time of measured cooling-related behavioral patterns of occupants in university dormitories
  • 1322  Measurement and analysis of window opening behavior of an office building in Xi’an during summer
  • 1323  Evaluation of the influence of interior design parameters on circadian daylighting of design-studio classrooms
  • 1324  Auto optimization of building retrofit based on the whole life performance
  • 1325  A district level analysis for evaluating the future summer overheating in Belgium
  • 1327  Influence of radiation modeling on a simplification shoeboxing algorithm for Urban and Building Energy Modeling
  • 1328  OTTO: Outline of an Occupants Theory-Tailored Ontology for building performance simulation
  • 1329  Direct load control for district heating load management using least-squares support vector machine
  • 1330  Exploring cross-project building performance prediction: creation and implementation of a zone-based surrogate model for building performance optimization
  • 1331  Can photovoltaic systems' energy harvesting potential inform building design and retrofit decisions?
  • 1332  Modeling and simulation of the valorization of waste heat from hydrogen production in district thermal systems
  • 1334  A method to enhance representation of air-conditioning systems on building energy benchmarking
  • 1335  A new bioclimatic zoning for India
  • 1336  Performance comparison of three Sensitivity Analysis methods for Building-Stock Energy Models: Sobol’ SA, OAT and standardised regression SA
  • 1337  Performance of CCHP with ice storage under climate change: a case study in Shenzhen
  • 1339  Energy, water, and food nexus simulation for built environments in a desert climate
  • 1340  Climatic applicability of indirect evaporative cooling technology for data centers in China
  • 1341  Pedestrian-level wind and pollutant exposure risk around a semi-open industrial building
  • 1342  A dynamic analysis of Photosynthetically Active Radiation (PAR) availability to achieve a biophilic office building in three highly dense Chinese cities
  • 1343  Model predictive control for heat flexibility activation of the Thermally Activated Building System
  • 1346  A method for selection of outdoor design conditions based on simultaneous occurrence of meteorological elements by using multivariate joint distributions
  • 1347  Development of a data-driven predictive control based on a novel physics-informed neural network
  • 1348  Source term estimation of gaseous pollutant based on the response matrix from m-sequence pulse technique
  • 1350  Building energy consumption and peak load reduction potential of mixed-use community through urban building energy modeling
  • 1351  Indoor air quality assessment based on particulate matter contamination
  • 1352  How real-time energy feedback influences energy-efficiency and aesthetics of architecture design and judgement of architects: two design experiments
  • 1354  A new workflow of urban scale 3D modelling and simulations to test the implications of the latest area-based FAR regulations on microclimate in the megacity Dhaka Conference
  • 1355  Assessing the Potential of Open Data for Expanding the Urban Building Dataset: A case study in Huangpu District, Shanghai
  • 1358  Distributed model predictive control using a trigger time search for optimal heating of multizone buildings
  • 1360  Machine learning driven parameter identification for grey-box thermal modelling for buildings
  • 1361  Study on the indoor thermal environment affected by open window in passive building
  • 1362  Investigation of indoor thermal environment, heating and cooling behaviors at rural residential buildings in Jiangsu, China
  • 1363  An occupant-centric demand response strategy with the minimum sacrifice of thermal comfort in an office building case
  • 1365  Developing a simulation-based workflow for healing building envelopes in healthcare design
  • 1366  A data framework enabling BEM and BMS interoperability based on semantic web technologies and Brick ontology
  • 1367  Developing a digital workflow to estimate green walls’ performance for enhancing indoor air quality.
  • 1369  A comparative study of dynamic building simulation and machine-learning within a two-stage multi-objective stochastic optimization framework
  • 1370  Phyvac: a Python module for highly flexible HVAC system simulation, and fault dataset generation as an application example
  • 1371  Benchmarking model predictive control algorithms in Building Optimization Testing Framework (BOPTEST)
  • 1372  A Bayesian deep learning methodology with uncertainty quantification for harnessing the residential building heating system energy flexibility
  • 1373  Assessing seasonal fluctuations of thermal comfort in social housing courtyards
  • 1374  Thermal comfort study in MSMEs in Cairo using onsite measurements and optimization algorithm
  • 1375  Development and Experimental Validation of a RC Model to Predict Indoor Air Temperature of a Room Assigned for Extreme Warm Climate: Case Study of Baitykool Prototype in Dubai
  • 1376  Surrogate Modeling performance for building design problems
  • 1377  A grey-box modelling methodology for liquid-based building integrated photovoltaic/thermal collectors
  • 1378  Inverse surrogate modelling to determine thermal characteristics of buildings
  • 1379  Rapid prototyping of building energy system modeling for shopping centers
  • 1380  Low-cost photographic measurement of colour, specular reflectance, and roughness
  • 1381  Stochastic-based occupant-centric building archetype modelling using plug loads
  • 1382  Urban Building Energy Modelling and Generative Design - an integration for energy-optimized urban design: a systematic review
  • 1383  A new local area energy mapping approach for targeting high-density deployment of heat pumps in the UK
  • 1384  The future of weather files for building performance simulation in New York State
  • 1385  Assessing the impact of building shape on aircraft noise attenuation: comparison between geometrical acoustics simulation and in-situ measurements
  • 1386  A Review of the Fundamental Concepts of CFD for Novice Users in Building Research and Design
  • 1387  Streamlined Urban Thermal Comfort simulation workflow
  • 1388  Integrating simulation and measurement techniques to model outdoor noise and heat in airport neighbourhoods with varying urban geometries
  • 1389  Accelerating photovoltaic potential simulations for urban building energy modeling to inform policymakers
  • 1390  A web dashboard to support early design decisions to meet energy goals
  • 1391  Infomorphism: an urban planning approach for equitable access to renewable energy
  • 1392  Semi-automated extraction of HVAC system topology from imperfect Building Information Models
  • 1393  Evaluating an auto decoder-based generative model for the infomorphism urban planning framework
  • 1394  Development of a surrogate model for interactive early-stage net-zero building design
  • 1395  Infomorphism: integrating a forecasting model for high-resolution urban energy demand prediction
  • 1396  Data Driven Neighborhood Design, a proof of concept for optimizing neighborhood geometry based on direct solar radiation.
  • 1397  A bibliometric analysis of immersive virtual environment applications for occupant comfort and behavior research
  • 1398  Predicting energy consumption and thermal comfort in buildings using a hybrid machine learning and building performance simulation approach
  • 1399  A novel model reduction and calibration methodology to define lumped parameters of building thermal models
  • 1400  Ensemble transfer learning strategy in forecasting power consumption for residential buildings
  • 1401  Predicting air infiltration and window state in residential dorms using deep neural networks coupled with energyplus
  • 1402  Automatic operation method using wireless sensor networks for variable refrigerant flow system: switchless control variable refrigerant flow system
  • 1403  Unsupervised estimation of residential electricity outages from aggregated meter data
  • 1404  A framework for the design of representative neighborhoods for energy flexibility assessment in CityLearn
  • 1405  Agent-Based Modeling of Occupants for Occupant-Centric Design of Flexible Workplaces
  • 1406  Facade Scanner: A scalable workflow for building geometry and window-to-wall ratio capture for urban building energy modeling.
  • 1407  Analyzing and modeling occupant behavior by inverse problems with smart meter data
  • 1409  A data-driven model on skin temperature and dynamic thermal sensation under step-change solar radiation
  • 1410  Systematizing Optioneering Approach in high performance building design
  • 1411  A multimodal Generative Adversarial Nets model for the prediction of matrix-based building performance
  • 1412  Building energy modelling based on building information modelling: the remaining problems and a more robust method
  • 1413  Graph Convolutional Network (GCN) for predicting multizone airflow path
  • 1414  Human-centric lighting assessment of balcony design
  • 1417  Identifying tolerance bands for internal surface mould growth simulation
  • 1418  A novel framework for Bayesian calibration of building energy models with sub-hourly building operational data
  • 1420  A smart feedback control strategy for building fast demand response using air-conditioning systems
  • 1421  A data-driven method to control buildings sub-zones to spatio-temporal profiles
  • 1423  Optimal sensor/actuator placement and control of buildings sub-zones
  • 1424  Sensorium: commissioning abundant sensors with augmented reality and QR codes
  • 1425  Study and validation of a novel parameter configuration for a simplified dynamic model of the pipe embedded wall
  • 1427  Integrating unacknowledged socioeconomic energy vulnerabilities in Urban Building Energy Modelling workflows: Informing intervention strategies for underrepresented communities
  • 1428  Field study of data-driven model predictive control for GEOTABS in an ultra-low energy office building
  • 1429  Model predictive control strategy of air conditioning system based on dynamic passenger flow: an airport terminal building case study
  • 1430  A Review of the Energy Performance Gap between Predicted and Actual Use in Buildings
  • 1431  Development of prototypical district-scale models
  • 1432  Potential building resiliency indicators to heat waves suitable for housing renovations
  • 1433  Design optimization of atrium, skylight, and façade design for daylighting performance in tropical office buildings using k-Nearest Neighbour classifier and Pareto frontiers
  • 1434  The role of HVAC controls in building digital twins: lessons learned from demonstration buildings with an application to air handling units
  • 1435  A high-fidelity zoning and characterization approach for building energy models in urban building energy modeling
  • 1436  Integrated optimal control for cooling AHU with two different chillers
  • 1437  Extension of a Virtual Reality Simulation Environment with an immersive experience of thermal radiation for the user
  • 1440  Numerical simulation of wind and buoyancy effects on ventilation and interunit dispersion in street canyons
  • 1441  Simulation of electric vehicle charging demand in Japan based on location log data of smartphone apps
  • 1442  Assessment of Building Wind-driven Rain Exposure in China in the Future Climate of 2050
  • 1443  Development of numerical model calculating heat and mass transfer in energy recovery based on water potential as moisture driving force
  • 1444  Prediction method of Coincident design day based on SCP model and XGBoost algorithm
  • 1445  What is happening? Why is it happening? – Investigative pedagogical approach for building performance simulation education
  • 1446  Multispectral lighting simulation approaches for predicting opsin-driven metrics and their application in a neonatal intensive care unit
  • 1447  Environment for pre-simulation characterization of energy models through set analysis
  • 1448  Build tight, ventilate right; would still need energy might?
  • 1449  How sports behavior uncertainty affects player’s visual comfort in national fitness halls: A probabilistic assessment approach
  • 1450  A novel rooftop solar energy potential estimation method based on deep learning at district level
  • 1451  A comparative analysis of energy consumption through HVAC system configuration in a building-integrated rooftop greenhouse
  • 1452  Study of temperature sensors online fault-tolerant control for HVAC system using EnergyPlus-Python co-simulation
  • 1453  Simulation-based design optimization of Local Energy Communities: a case study of the BAM living lab
  • 1454  Intelligent control strategy of air handling unit based on digital twins
  • 1455  Impact of different perforation rates of perforated louvers on indoor visual comfort and outdoor views
  • 1456  Optimal design of distributed energy systems for enhanced energy flexibility and the impacts of the evolving electricity market prices
  • 1457  Reduced energy cost of heat-pump driven heating systems by smart use of thermal storage.
  • 1458  Clustering analysis of IAQ patterns and characteristics in a university dormitory
  • 1460  Optimal design ofenergy-saving renovation oriented for ultra-low energy housings and carbon emission in cold region
  • 1461  Comparative cost-benefit analysis of upgrading existing office buildings in European climates
  • 1462  Rethinking natural ventilation strategies in buildings through simulation
  • 1463  Evaluating the impact of insulation on activating energy flexibility in residential dwellings
  • 1464  Effects of COVID-19 confinement on energy needs of residential buildings in Milan
  • 1467  Climate-resilience examination of retrofitting measures based on future climate data and energy supply with waste heat
  • 1468  Developing teaching in urban building energy modelling
  • 1469  Using Building Performance Simulation to enhance energy efficiency evaluations of Room Air Conditioners
  • 1470  Development of urban building energy models in Hong Kong based on open-source datasets
  • 1471  Study on the performance of fractional-step methods for unsteady ventilation simulations
  • 1472  Resilient housing and climate change: analysis of ozone spatial variations based on experimentally validated CFD simulations
  • 1473  Energy efficiency and demand response assessment for refrigerated warehouses
  • 1474  Thermal comfort in low-income housing in informal settlements in Lima, Peru. Towards a localised adaptive comfort standard
  • 1475  Verification of the use of hybrid weather files for concurrent assessment of space heating and indoor overheating
  • 1476  3D printing path optimization strategy based on Dijkstra's algorithm --The contour slicing method with Eulerian loop optimization as an example
  • 1478  Value of Information Analysis for rationalising information gathering in building energy analysis
  • 1479  Effect evaluation of heat transfer optimization approach for multi-tube energy storage unit
  • 1480  Investigating the relationship between energy assessor training and assessment methodology in standardised energy assessments in Europe
  • 1481  Pathway toward prior knowledge-integrated machine learning in engineering
  • 1482  A virtual testbed for robust and reproducible calibration of building energy simulation models
  • 1483  Development of an evaluation system for Japanese Global Warming Countermeasures Plan in the residential sector
  • 1484  Textile as second-skin façade for building envelope retrofitting: a numerical analysis on the comfort, energy and environmental impacts in different European climates.
  • 1485  Effect of technical building system types on load matching indicators for net zero energy residential buildings
  • 1488  A building stock-level investigation on residential gas consumption setback possibilities in central Europe
  • 1489  Methodology for the calculation of energy scenarios to achieve carbon neutrality in the building stock
  • 1490  Data-driven energy management of a neighborhood with renewable energy sources
  • 1491  Developing a new decision support tool for sizing louvers in hot and humid climates concerning light efficiency and building energy gain
  • 1493  Prototyping the DOPTEST Framework for Simulation-Based Testing of System Integration Strategies in Districts
  • 1494  New methods of designing high-rise residential towers with the ventilation effectiveness study: traditional Korean muntins, "Sal"
  • 1495  Optimal battery sizing model sensitive to control strategies in microgrids
  • 1496  The role of Building Performance Simulation in developing an evidence based retrofit strategy for Net Zero social Housing
  • 1497  A robust operational strategy based on building flexibility quantification
  • 1498  Investigating scalable replacement of weather compensated control with MPC in buildings with legacy equipment
  • 1499  Effect of infill height design variation of 4D-printed hygromorphic-based louvers on daylight performance
  • 1500  Investigation of input feature combinations considering occupant behavior for modeling indoor air temperature in a classroom
  • 1501  Modification of sol-air temperature calculation model in high altitude area: A case study in Lhasa of China
  • 1502  Investigating the “whole-life performance” of representative profile extraction for microgrid planning
  • 1503  Development of Numerical Model and Design Framework for Mixed-Mode Ventilation in the Tropics
  • 1504  Adaptive façades for residential buildings: a preliminary study
  • 1505  Optimization of outdoor thermal comfort in high-rise residential blocks based on the design of landscape-integrated wind deflector
  • 1506  Exemplifying the importance of simulation parameters in building applications by validating airflow models in Grasshopper
  • 1507  Analysis of actual VRF system usage situation of urban university based on large amounts of operational data
  • 1508  Developing a Framework for Automated Modelling of BIPV
  • 1509  Identification of room occupancy and activity based on Gaussian Mixture Modeling of HEMS data
  • 1510  Research on the Passive Energy Saving Effect of Phase Change Materials in Village Self-built House - Take the Cold Region as an Example
  • 1511  Net-zero individual housing: investigating passive retrofitting scenario in warm mediterranean climate
  • 1513  A Conditional Generative Adversarial Networks (CGAN) model for indoor wind field images prediction
  • 1514  A user-centered interactive optimization approach based on immersive virtual reality
  • 1515  CFD design of a novel torque measurement damper without air flow instability effects
  • 1516  Bio-jaali: Passive building skin with mycelium for climate change adaptation to extreme heat
  • 1517  Thermal and uncertainty analysis of a lightweight floor with integrated TABS and ventilation system
  • 1518  Application of ISO/DIS 52016-3 for Dynamic Shadings in an Office Building
  • 1519  A framework for parametric multi-criteria decision analysis (P-MCDA) for building retrofits
  • 1520  An analytical approach for evaluating the concentrations of multiple generic air contaminants in EnergyPlus simulations
  • 1521  Theoretical study on thermal performance of dynamic composite envelope (DCE)
  • 1522  Development of a building stock energy model for commercial building stock considering heterogeneity and yearly change in building stock
  • 1526  Flows across 3D urban street canyons: Reynolds number independence revisited
  • 1527  Assessing the microclimatic adaptation of a Modern Movement 1960s neighbourhood through its urban evolution.
  • 1528  Energy analysis of resilient cooling technologies in Mediterranean buildings – A case study
  • 1529  Energy modelling and forecasting for an underground agricultural farm using a higher order dynamic mode decomposition approach
  • 1530  Influence of future climate scenarios on the sizing of Building-Integrated Photovoltaics (BIPV) installations. Case study of a new research-center building in Switzerland
  • 1531  HVAC systems performance modeling using component-based machine learning
  • 1532  Household air conditioning in small towns in cold regions under winter conditions Experimental Research on Demand Response
  • 1534  The reduction of building energy demand by a living wall system in a Central European climate
  • 1535  Evaluations of energy efficiency of air-conditioning systems designed by coincident design day
  • 1536  Suitability of Test Reference Year for performance assessment of buildings with PV-battery system
  • 1538  Assessing the cooling performance of tropical dwellings using multi-year future climate scenario EnergyPlus weather files: A case study of Brunei Darussalam
  • 1540  Experimental and numerical study of geothermal rainwater tanks for buildings passive cooling using Crank-Nicolson’s Method
  • 1541  Life cycle assessment of building reversible ground-coupled heat pump systems supported by dynamic electricity mix data
  • 1542  Activity-based synthetic framework for modelling energy demand of residential building stock
  • 1543  Identification and assessment of urban ventilation corridors in the urban canopy layer under dynamic wind directions
  • 1544  Environmental impact assessment of renewable energy communities: the analysis of an Italian neighbourhood
  • 1545  Discrete optimal control of building to grid integration based on quantum computing
  • 1546  A review of the control optimization and application potential of the radiant floor cooling system
  • 1547  Informing early-stage design decisions: Comprehensive spatial and temporal analyses of outdoor thermal comfort to maximise the use of schoolyards.
  • 1548  Large-scale data-driven predictive control of AHU and RTU systems for New York State in winter
  • 1549  Evaluation of existing residential renovation strategies in Shanghai based on coupled microclimate and energy simulation
  • 1550  Coupling CFD and BES simulation for the energy certification of buildings in Spain
  • 1551  Human-Building Collaboration: toward lighting enabled collaborative system design
  • 1552  Pedestrian-Oriented Communities: Regenerating critical street typologies using Spatial-Accessibility simulation tools to forecast change in neighbourhood GHG emissions
  • 1553  Physical informed graph convolutional networks for fast simulation of thermal bridges in building structures
  • 1554  Influences of indoor clothing adaptations on energy consumptions in rural houses
  • 1555  Investigation into the influence of air supply blade swing on indoor thermal environment of stratum ventilation for heating mode
  • 1557  Urban vegetation design recommendation for improving outdoor thermal comfort in tropical and temperate climate zones
  • 1558  Analysis of indoor thermal environment and passive design variables in a college dormitory building
  • 1559  Study on the influence of kitchen door seam on air distribution in severe cold regions
  • 1560  Investigation of cold storage integration in a Danish data center
  • 1561  Coordinate descent-based model calibration methodology for HVAC subsystems
  • 1563  Sizing of optimally controlled district heating systems: effect of district size and occupancy heterogeneity
  • 1564  A bi-level optimization method for a regional integrated energy system under climate change conditions
  • 1565  Digital twin simulation of a Danish school building
  • 1566  A deep learning approach for pedestrian wind comfort prediction for generative design processes
  • 1567  Can we trust building energy performance models’ results?
  • 1570  A Machine Learning Model for the Prediction of Building Hourly Heating Demand from CityGML Files: Training Workflow and Deployment as an API
  • 1571  Integrated thermal strategies for UK non-domestic building energy demand
  • 1572  Evaluation of neighbourhood sustainability assessment tools for practicing on an existing neighbourhood in Great Paris
  • 1574  Which summer comfort level can be reached by using heat emitters connected to district cooling in residential buildings?
  • 1575  Systematic review of the use of artificial intelligence methods in hospital energy prediction
  • 1576  Towards automated fault detection and diagnosis in district heating customers: generation and analysis of a labeled dataset with ground truth
  • 1577  Assessing the impact of climate change and urban heat island on the city-wide building cooling demand in Barcelona using the SUECM model
  • 1578  Combined reinforcement learning (RL) and model predictive control (MPC) for optimal building energy use
  • 1579  Exploring energy poverty and potential retrofit scenarios of masonry residential stock in Mediterranean climate
  • 1584  Occupant behaviour (OB) modelling to support urban building energy simulation: an overview.
  • 1585  Challenges in modelling thermo-optical performance of 3D-printed facades: a cross-domain review
  • 1586  Cooperative control strategy of shared energy storage system for smart grid
  • 1587  Design optimization of heating and cooling systems of a mixed-use community
  • 1588  Development of a Directed Acyclic Graph through expert elicitation for Causal Inference in Built Environment Research.
  • 1589  Adaptable and scalable energy modeling of ventilation systems as part of building digital twins
  • 1590  A surrogate CFD model using Machine Learning for fast design explorations of the indoor environment
  • 1592  Verification of PyDHN - a Python library for the thermo-hydraulic simulation of district heating networks - through the DESTEST
  • 1593  Field testing of air change rate in university dormitories under different window-opening behaviors in Nanjing , China
  • 1594  The effect of Urban-scale shading on building energy modelling results of an educational building in Montréal
  • 1595  Implementation and demonstration of an automated energy modeling framework for scalable and adaptable building digital twins based on the SAREF ontology
  • 1596  Investigation into the use of statistically and dynamically downscaled future climate datasets in assessing building performance
  • 1598  Enhancing operation flexibility of distributed energy systems: a flexible multi-objective optimization planning method considering long-term and temporary objectives
  • 1599  Numerical validation of a simplified design procedure for calculating the heating load in buildings with Breathing Wall components
  • 1600  Uncertainty in UK building energy compliance testing using building performance simulation
  • 1601  Modeling Indoor Air Quality at the design stage
  • 1602  Study on floor heating systems influenced by intrinsic and extrinsic factors - a review
  • 1603  Radiant split for the internal heat gains in buildings with radiant cooling systems
  • 1605  On the role of urban modelling tools to support the urban energy transition
  • 1606  Effectiveness of Building Performance Optimization in a Design Experiment
  • 1607  Occupancy-based model predictive control for residential building cluster with photovoltaic and battery systems
  • 1608  Pricing scheme design for vehicle-to-grid considering customers risk-aversive behaviors
  • 1609  Life cycle optimisation study for retrofitting an archetype building in new cities in Egypt
  • 1610  Creation of Cold Spell Year in cold climate zones
  • 1611  Semi-automated thermal envelope model setup for adaptive model predictive control with event-triggered system identification
  • 1612  Epwshiftr: incorporating open data of climate change prediction into building performance simulation for future adaptation and mitigation
  • 1613  Research on the Greening Design of Pocket Parks Based on the Optimization of Thermal Comfort and Ecological Benefits
  • 1614  Building performance simulation of an office building without conventional mechanical systems in cold/temperate climate
  • 1615  Simulating human response to actual light exposure: Comparison of room and human-centric standards
  • 1616  Developing climate change adaptation measures for urban planning in the city of Munich (Germany) using the urban climate model PALM-4U
  • 1617  A user’s portrait method based on historical electricity data for demand response at urban scale
  • 1618  How does different collected data influence data-driven chiller model – Analysis of collected data distribution using causal discovery method
  • 1619  Decision tree model combined with Latin Hypercube Sampling to identify low energy optimal renovation strategies
  • 1620  Data mining and feature selection to support optimization of a demand-control ventilation system
  • 1621  Leveraging simulation data to predict thermal comfort using reduce order modelling
  • 1622  Utilization of auxetic structures in advanced shading systems to improve lighting and thermal performance in Florida, USA
  • 1623  Numerical and experimental Thermal study of a small-scale urban block with courtyard
  • 1626  Designing renewable energy production at district scale: a sensitivity analysis
  • 1627  Visual and non-visual impacts of commercial signboards in residential areas
  • 1628  Building performance simulation of Advanced Building Envelope (ABE): towards a python-based open-source library to support co-simulation for design and operations
  • 1630  Research on model calibration method of chiller plants based on error reverse correction with limited data
  • 1631  Improvement of urban thermal comfort by distribution of thermal inertia and albedo through solar paths using FEM
  • 1632  Energy performance of commercial buildings in partial-to-no- occupancy: Lessons learned from the COVID-19 pandemic lockdown in Canadian government buildings
  • 1633  Identifying Height-Based Parameters of Roof Shading as a Passive Cooling Strategy in Buildings
  • 1635  District scale simulation for supporting decarbonizing plans
  • 1636  Method for Estimating the Potential of Small Wind Power in the Urban Built Environment
  • 1637  Prospective dynamic life cycle assessment of residential heating and cooling systems in four different locations in United States
  • 1639  Assessing occupant comfort in historic churches when using localised heating systems
  • 1641  JAX-based gray-box modeling framework for hybrid thermal building models
  • 1644  Evaluating building carbon footprint in concept design stage
  • 1645  Assessing the efficacy of multi-vent module-based adaptive ventilation in safeguarding room occupants against infection using a new design parameter
  • 1646  Transient contaminant transport prediction based on computational fluid dynamics and Markov chain method with application of non-uniform state size
  • 1648  Operational carbon footprint analysis and low-carbon design strategies of a high-rise office building in subtropical Guangzhou, China
  • 1649  Design Optimization of Building Form and Fenestration for Daylighting and Thermal Energy in Three Variations of the Hot Climate of Egypt
  • 1650  Energy demand uncertainty analysis based on a probabilistic building characteristics approach
  • 1652  Performance Evaluation and Resilience Testing of a Passivhaus school
  • 1653  Passive adaptation strategies to mitigate the overheating risk in an existing Canadian school
  • 1655  Flexible cooling demand in cluster of buildings: energy flexibility quantification in presence of central or distributed photovoltaic generation
  • 1658  A study on simplified analysis of 3D wall jet using momentum method
  • 1660  Control Performance Verification – The hidden opportunity of ensuring high performance of building control system
  • 1662  From Building Energy Models (BEM) to Urban Building Energy Models (UBEM): input data and modelling approaches
  • 1663  Supporting the EU mission “100 climate-neutral cities”: using urban building energy modeling for zero-emission building retrofit scenarios at district scale
  • 1664  A Comparative Analysis of Simplified and Detailed Modelling Procedures for the Assessment of Chiller Efficiency in the European Context
  • 1665  Potential effect of mechanical ventilative cooling on the climate resilience of the Italian residential building stock
  • 1668  Techno-economic assessment of a model-based Legionella control measure by combining thermal shocks and UV radiation in residential hot water systems
  • 1670  PALM-4U GUI: A cloud based user-friendly graphical user interface for the urban climate model PALM-4U
  • 1671  Leveraging mobile positioning data to model building occupant behaviour in a mixed-use district
  • 1672  Performance gap analysis in the context of building energy efficiency certificate in South Korea
  • 1673  A data-driven framework for modelling community energy demand
  • 1675  Solar Photovoltaics and Battery Energy Storage systems potential for grid flexibility and to address electrical demand of air-source heat pump systems in canadian homes
  • 1676  Design analysis of distributed energy systems with different energy storage devices under a flexible scheduling strategy
  • 1677  Model predictive coordinated control method for non-uniform indoor temperature environment with VAV system
  • 1678  Empirical decomposition of time signals of power consumption
  • 1679  Dynax: a differentiable dynamic energy simulator for inverse inference, optimal control and end-to-end learning
  • 1680  A validated high-fidelity simulator for an ultra-efficient office building based on coupled EnergyPlus-Modelica models
  • 1681  Study on the dynamic modes of indoor environment based on the high-precise monitoring and occupant behavior of adaptively technological regulation
  • 1684  Finding an optimal angle to balance daylight and glare for serrated window at western facade in a typical office based on numerical simulation
  • 1685  Dynamic simulation on the effectiveness of evaporative cooling and fan in reducing heat strain during a heatwave
  • 1686  Development of a dynamic building stock model for smart energy transition decision support: university campus stock case study
  • 1687  Research on local heating technology in extremely low temperature environment based on thermal comfort and cfd
  • 1688  Toward a resilient campus: Analysis of university buildings to evaluate fast implementing strategies to reduce the energy consumption
  • 1690  Estimating the impact of building retrofit measures on the operational greenhouse emissions of medium office buildings – A case study in Ontario, Canada
  • 1692  Implementation of real-time model predictive control (MPC) of energy recovery ventilators for school buildings
  • 1693  Energy saving potential of a sunspace with passive soil heat storage in Tibet plateau
  • 1694  Data-driven structural equation modelling reveals pathways of urban morphology impacting urban building energy use
  • 1699  A deep learning accelerator framework for large eddy simulation in the built environment
  • 1701  Various waste heat recoveries and potential energy savings in an ice hall in Finland
  • 1702  The parallel modification of state space method for enhancing building thermal process simulation
  • 1704  Impact of influential factors on gray-box model performance for identification of building thermal properties: numerical and analytical analyses
  • 1705  Research on the optimal period of record for determining climatic design parameters under climate change
  • 1706  Occupancy based optimization of energy-saving control method for indoor heating equipment in exhibition hall buildings
  • 1707  Quantifying model uncertainty of exterior convective heat transfer coefficient models in building energy simulation by onsite measurement
  • 1708  MOOSAS - a building performance optimization tool in the early design stage: development, evaluations, improvements, and applications
  • 1710  A case-study of spatial and temporal characteristic analysis for indoor CO2 and PM2.5 concentration in open office space
  • 1711  Study on the effect of ventilation corridors in different urban block forms
  • 1712  The Influence of Occupancy Change on the Change of Heating and Cooling Energy Consumption in Residential Buildings - A Case Study of Nanjing
  • 1714  A framework for HVAC system auto-zoning based on BIM
  • 1715  Development of a calibrated zonal model for airflow and temperature distribution prediction
  • 1716  An optimal CO2-based demand-controlled ventilation strategy to improve ventilation flexibility in large airport terminals
  • 1717  Explore the cooling demand change in a residential district under typical meteorological year and extreme hot year
  • 1719  Cooling water system control of a commercial complex based on reinforcement learning
  • 1720  Development of extreme meteorological years for analysis of indoor thermal performance during heat and cold events
  • 1721  Influence of geometric parameters of stacked sports buildings on natural ventilation
  • 1723  Comparison study of human thermoregulation models
  • 1724  Directional anisotropy of diffuse solar irradiance: impact assessment on the solar transmittance of common glazings
  • 1725  Comparative analysis of uncertainty characterization methods in urban building energy models in hot-arid regions
  • 1726  Development and application of brick schema based multi-sources data integration for smart building energy management
  • 1727  Automatic generation of RC models using IoT data from commercial buildings
  • 1729  Energy consumption characteristic analysis and multi-source instance transfer prediction based on chiller operational data
  • 1730  An image characterisation method for AHU fault diagnosis based on residual neural networks
  • 1734  A GA-based NZEB-cluster coordinated control towards power grid overvoltage optimization
  • 1735  A novel 3D-geographic information system and deep learning integrated approach for high-accuracy building rooftop solar energy potential characterization of high-density cities
  • 1736  A study on multiple occupant behavior detection based on computer vision technique
  • 1737  Analysis of carbon emission influencing factors and evaluation of carbon reduction strategies in Shanghai's construction sector based on LMDI-SA
  • 1738  A comprehensive performance evaluation framework establish scheme for the operating period of buildings based on CRITIC-Entropy weighting method
  • 1739  A review of the comprehensive indoor environment quality assessment of office buildings
  • 1740  Regression models for predicting carbon emission reduction potentials in existing office buildings
  • 1741  A study on the carbon emission reduction path of rural energy consumption based on bilateral supply and demand management: a case study of shanghai suburbs
  • 1742  Simulation Analysis on Energy Supply System of Rural Building in a Typical Village in Cold Region of China